Z

CD8 / DD8 Feature Comparison

The new AXALIGHT DD8 / CD8 models provide many enhansements over the legacy DD4 model as follows.

More info on the new models can be found at here

WiFi configuration portal
Fiddle free operation (no local buttons)
RDM remote configuration
Seperate DMX common for IN/THRU
Four V+ terminals
Three V- terminals
Pluggable 10A rated connecors
Connectors flame retardant PA66
RGB to RGBW translation
Firmware upgrades
RDM label change
25% channel width reduction
Power management capability
DD8 - DMX DRIVE 8
CD8 - CLOUD DRIVE 8
DD4 (archived)
X
X
X
X
X
X
X
X
X
X
X
X

DIN DRIVE 4 - DMX/RDM 16bit LED DIMMER (Archived)

DMX/RDM dimming and DIN rail flexibility for constant voltage LED control applications.

Z

FEATURES

  • DMX/RDM control input
  • RDM remote configuration
  • 4 x CV constant voltage LED control outputs
  • 8-bit 4/3/2/1 channel mode
  • 16-bit 8/6/4/2 channel mode
  • DIN rail format
  • SELV DC supply input
  • DMX address display
  • DMX IN/THRU connections
  • Push button terminals

ELECTRICAL

  •  24 Volt DC supply input 
  • Common anode (+) 
  • Controlled cathode (-) 
  • 5 Amp per channel load 
  • 20 Amp total peak load 
  • 50% duty cycle reccomened 
1

PHYSICAL

  •  53W x 98H x 65D mm (110H with fixing tabs) 
  • 3 DIN rail modules wide 
  • 115 grams product weight 
  • IP20 protection rating 
  • -20° ~+50°C ambient temp 
  • Packing size: 115x70x60mm 
  • Packing weight: 0.14 kg 
AXALIGHT DD4 LED dimmer

AXALIGHT DIN-DRIVE 4 DMX/RDM
CONFIGURATIONSETTINGS

4 DIGIT Display 8888

Display Setting Default
A.xxx DMX Address 001
cH.xx DMX Channel Patch 04
bT.xx 8 or 16 bit PWM Resolution 16
PF.xx PWM Frequency 01
9A.xx Dimming Gamma 1.5
dP.xx Decoding Personality 1.1

MENU BUTTONS

[BACK]    [ENTER]    [UP]    [DOWN]

DISPLAY CURRENT SETTINGS

Press [UP] [DOWN] to scrool and display current the settings.

DMX Signal indicator

When DMX is received, the [•] point indicator after the first display digit will light.

Restore Factory Defaults

Press and hold down [BACK] and [ENTER] until the display turns off. 

A.xxx = DMX Start Address

Select menu A.xxx, press [ENTER], the display will flash, press [UP] [DOWN] to set DMX address (hold for fast change), press [BACK] to confirm.

BT.xx = PWM Resolution

Select menu BT.xx, press [ENTER], display will flash, press [UP] [DOWN] to select 08 or 16 bit, press [BACK] to confirm.

9A.xx = DIMMING GAMMA CURVE

Select menu 9A.xx, press [ENTER], display will flash, press [UP] [DOWN] to select 0.1~9.9, press [BACK] to confirm.

PF.xx = PWM Frequency

Select menu PF.xx, press [ENTER] , the display will flash, press [UP] [DOWN] to select 00~30, press [BACK] to confirm.

DISPLAY SETTING
PF.00 500 Hz
PF.01 1 kHz
PF.02~30 2~30 kHz

 

CH.xx = DMX Channel PATCH

Select menu CH.xx, press [ENTER], display will flash, press [UP] [DOWN] to set DMX channel patch , press [BACK] to confirm.

Example the DMX start address is set to [001]

DISPLAY CONTROL CHANNELS OUTPUT PATCH
CH.01 1 All 4 outputs on address [001]
CH.02 2 Outputs 1 & 3 on address [001]
Outputs 2 & 4 on address [002]
CH.03 3 Outputs 1 & 2 on address [001] & [002]
Outputs 3 & 4 on address [003]
CH.04 4 Outputs 1, 2, 3, 4 on address [001],  [002],  [003], [004]

 

DP.xx = DECODING PERSONALITY - 1 CH

Select menu dP.xx , press [ENTER] , display will flash, press [UP] [DOWN] to select the decoding personality, press [BACK] to confirm.

DMX Channel dP.1.1 dP.2.1
1 Out 1 Out 1 Coarse
2 Out 2 Out 1 Fine

DP.xx = DECODING PERSONALITY - 2 CH

Select menu dP.xx , press [ENTER] , display will flash, press [UP] [DOWN] to select the decoding personality, press [BACK] to confirm.

DMX Channel dP.1.1 dP.2.1 dP.3.2
1 Out 1 Out 1 Coarse Out 1
2 Out 2 Out 1 Fine Out 2
3 Out 2 Coarse Grand Master
4 Out 2 Fine

DP.xx = DECODING PERSONALITY - 3 CH

Select menu dP.xx , press [ENTER] , display will flash.
Press [UP] [DOWN] to select the decoding personality, press [BACK] to confirm.

DMX Channel dP.1.1 dP.2.1 dP.4.3 dP.5.4
1 Out 1 Out 1 Coarse Out 1 Out 1
2 Out 2 Out 1 Fine Out 2 Out 2
3 Out 3 Out 2 Coarse Out 3 Out 3
4 Out 2 Fine Grand Master Grand Master
5 Out 3 Coarse Strobe Effects
6 Out 3 Fine

DP.xx = DECODING PERSONALITY - 4 CH

Select menu dP.xx , press [ENTER] , display will flash.
Press [UP] [DOWN] to select the decoding personality, press [BACK] to confirm.

DMX Channel dP.1.1 dP.2.1 dP.5.4 dP.6.4
1 Out 1 Out 1 Coarse Out 1 Out 1
2 Out 2 Out 1 Fine Out 2 Out 2
3 Out 3 Out 2 Coarse Out 3 Out 3
4 Out 4 Out 2 Fine Out 4 Out 4
5 Out 3 Coarse Grand Master Grand Master
6 Out 3 Fine Strobe Effects
7 Out 4 Coarse
8 Out 4 Fine